SVL

Commercial HVAC

 Back

ETTER Engineering - Gas Booster Series

E101-P E101-P HTD E101-PHC ENGB Gas Booster Gas Booster Accessories & Options gasPOD™ Packaged Systems

E101-P

Gas Booster

For More Information:
Manufacturer's Site
ETTER Engineering - E101-P - Gas Boosters

The ETTER Engineering E101-P packaged gas booster system is designed for pumping low volumes of gas, which is not corrosive to aluminum or steel, and is used when an increase in pressure is required from the available line pressure.

The package includes a magnetic coupled drive mechanism which has no shaft or shaft seals, eliminating potential leak paths.

The E101-P has a capacity range from 0 to 1000 CFH, with a maximum available pressure of 15″W.C. added to the inlet pressure. An outlet gas pressure regulator sets a constant outlet pressure over a range of flow rates. Performance information for the standard capacity model is listed on the sizing curve.

The E101-P is designed as a “Plug and Play”™ unit and comes completely pre-piped, wired and tested for your application.

The E101-P Features:
  • Metal skid-style frame with all components mounted and wired
  • UL/CSA approved gas booster pump and components
  • 1/3 HP TEFC motor, 120/1/60
  • 1″ NPT union ends inlet and outlet for easy installation
  • NO minimum flow rate requirement – pump can be dead-headed with no adverse effects!
  • Pre-plumbed check valves, bypass, and low gas pressure switch.
UL-Approved  Control Panel Includes:
  • Lights and push buttons
  • Operating interlocks
  • Motor starter, circuit breakers, and control relays

E101-P HTD

Gas Booster

For More Information:
Manufacturer's Site
ETTER Engineering - Gas Booster E101-P

The ETTER Engineering E101-P packaged gas booster system is designed for pumping low volumes of gas, which is not corrosive to aluminum or steel, and is used when an increase in pressure is required from the available line pressure.

The package includes a magnetic coupled drive mechanism which has no shaft or shaft seals, eliminating potential leak paths.

The E101-P has a capacity range from 0 to 1000 CFH, with a maximum available pressure of 15″W.C. added to the inlet pressure. An outlet gas pressure regulator sets a constant outlet pressure over a range of flow rates. Performance information for the standard capacity model is listed on the sizing curve.

The E101-P is designed as a “Plug and Play”™ unit and comes completely pre-piped, wired and tested for your application.

The E101-P Features:
  • Metal skid-style frame with all components mounted and wired
  • UL/CSA approved gas booster pump and components
  • 1/3 HP TEFC motor, 120/1/60
  • 1″ NPT union ends inlet and outlet for easy installation
  • NO minimum flow rate requirement – pump can be dead-headed with no adverse effects!
  • Pre-plumbed check valves, bypass, and low gas pressure switch.
UL-Approved  Control Panel Includes:
  • Lights and push buttons
  • Operating interlocks
  • Motor starter, circuit breakers, and control relays

E101-PHC

Gas Booster

For More Information:
Manufacturer's Site
ETTER Engineering - E101-PHC - Gas Boosters

The ETTER Engineering E101-PHC packaged gas booster system is designed for pumping low volumes of gas, which is not corrosive to aluminum or steel, and is used when an increase in pressure is required from the available line pressure.

The package includes a magnetic coupled drive mechanism which has no shaft or shaft seals, eliminating potential leak paths.

The E101-PHC has a capacity range from 0 to 1500 CFH, with a maximum available pressure of 15″W.C. added to the inlet pressure. An outlet gas pressure regulator sets a constant outlet pressure over a range of flow rates. Performance information for the high capacity model is listed on the sizing curve.

The E101-PHC is designed as a “Plug and Play”™ unit and comes completely pre-piped, wired and tested for your application.

The E101-PHC Features:
  • Metal skid-style frame with all components mounted and wired
  • UL/CSA approved gas booster pump and components
  • 1/3 HP TEFC motor, 120/1/60
  • 2″ NPT union or flanged ends inlet and outlet for easy installation
  • NO minimum flow rate requirement – pump can be dead-headed with no adverse effects!
  • Pre-plumbed check valves, bypass, and low gas pressure switch.
UL-Approved Control Panel Includes:
  • Lights and push buttons
  • Operating interlocks
  • Motor starter, circuit breakers, control relays

ENGB Gas Booster

Gas Booster

For More Information:
Manufacturer's Site
ETTER Engineering - ENGB - Gas Boosters

ETTER Engineering has been providing process heating and combustion solutions since 1940. Our vast experience in the 20th century led us to develop the ETTER Natural Gas Booster (ENGB) – a UL-Listed, hermetically-sealed gas booster designed for the 21st century, with the flexibility to fit whatever specifications your application calls for.

ETTER manufactures a complete line of packaged gas booster systems – true “Plug and Play”™ designs that arrive at your job site ready to begin work.

ETTER also offers FM-approved check valves and a variety of accessories and services to ensure your gas booster installation is as quick, easy, and cost-effective as possible.

Gas Booster Accessories & Options

Gas Booster

For More Information:
Manufacturer's Site
ETTER Engineering - Gas Booster Accessories & Options

ETTER Engineering offers an infinite variety of options to customize your natural gas booster system. Although standard designs are always available, we are always willing to customize your project to meet your specific needs.

Duplex Systems: Duplex Gas Booster Systems are prepackaged, piped, wired, and ready for installation. The primary and secondary skids can be arranged side to side or end to end (should it need to fit in a long, slender space)

Stacked Systems: When space is at a premium, a stacked system provides the necessary boost for your application while maintaining the smallest footprint possible. ETTER’s stacked gasPOD™ systems arrive on your job site prepackaged, piped, wired, and ready to install.

PLC Touch Screen Controls: ETTER utilizes the latest technologies for our gas booster systems, including PLC-based controls complete with Touch-Screen panel user interfaces (HMI). The base package includes the Gray Scale screen as shown; color screens are also available. The PLC not only provides a cleaner interface but provides additional features like automatic logging and time/date stamping of all alarms and shut-downs. Great for trouble-shooting!

UL-Listed Check Valve: The ETTER ECV prevents reverse flow of gas and air in the pipeline. Available sizes are 2″ (screwed FNPT) and 3″, 4″, and 6″ (125 # FF flanged) and can be used with natural gas and other non-corrosive gases. These valves have a maximum operating temperature of 200 degrees F.

Ventless Pressure Systems: ETTER provides yet another bonus with its Packaged Gas Booster Systems. In an effort to assist the Installations Contractor, the gas pressure switches are ventless as a standard. And for those in Massachusetts, yes they are Mass Board Approved! That’s right, NO MORE VENT LINES! We also provide Indoor Approved Ventless regulators on our gasPOD installations.

Outdoor Transclosures: Although ETTER offers an upgrade for only a few hundred dollars to make the system capable for outdoor installations, we can also provide the skidded system in an outdoor paneled enclosure. Features include vented panels and heavy duty hinged panel doors with lockable handle. Please contact us for pricing.

Duplex Outdoor Transclosures: When tamper-proof security and better protection from the elements is required for duplex systems, the preferred option is a steel transclosure. With this option, ETTER’s packaged gas booster systems leave our factory skid-mounted inside an outdoor paneled enclosure to provide superior weather protection, with vented panels and heavy duty, tamper-proof hinged doors with lockable handles to prevent unauthorized access. The enclosure upgrades range from a few hundred dollars outside the snowbelt, to standardized transclosures for easy access and serviceability during the winter months in colder climates.

gasPOD™ Packaged Systems

Gas Booster

For More Information:
Manufacturer's Site
ETTER Engineering - gasPOD™ Packaged Systems

The gasPOD™ is our skid-mounted, packaged hermetic gas booster system. It arrives at your job site pre-piped, wired and tested – no more technical risk!

On-site installation is quick and easy – simply mount the skid in place, connect electrical power to the control panel, connect the system’s supply and discharge piping to the field piping, then turn the switch.

As options, ETTER has various integrated control philosophies to suit your application needs, along with features such as Gas Leak Detection, outdoor steel transclosures, and heat exchanger packages. Your system can be customized to meet your needs.

Back to Manufacturer
Contact Us

Contact Us

    Reason for Contacting

    Get in TouchBillingEventsTraining/SeminarLiterature/Graphics/LogosEngineering ProjectsOther



    This will close in 0 seconds

    Parts Inquiry



      This will close in 0 seconds

      Equipment Inquiry



        This will close in 0 seconds

        Shipping Date/IOM Manuals/Wiring Diagrams Request



          This will close in 0 seconds

          Question for Sales Engineers



            This will close in 0 seconds

            Service Contact



              This will close in 0 seconds

              Aftermarket Parts




                This will close in 0 seconds

                General Job Application




                  This will close in 0 seconds

                  Hydronics Contact Form



                    This will close in 0 seconds

                    Viral Mitigation Contact Form



                      This will close in 0 seconds

                      Jim Lubratt

                      President & Chief Executive Officer

                      Jim Lubratt has been president of SVL since 2006. He first joined the company as a sales engineer in 1992 and was made a partner in 2000. He holds a Bachelor of Science in mechanical engineering from Southern Methodist University and first entered the HVAC industry as a marketing engineer for a heat pump manufacturer in Texas.

                      In addition to his role at SVL, Jim is vice president of AQC Industries, LLC, a manufacturer of specialized underground ductwork systems. He is also an investor and board member for Hydromx, Inc., a manufacturer of heat transfer nanofluids, and Crotega, Inc., creators of personal and building security solutions.

                      Jim and his wife, Tracy, met in college and married in 1993. They have three children, two of whom have graduated college in Texas, while their youngest is attending Grand Canyon University in Arizona.

                      Outside of work, Jim places a priority on his faith, family, friends, and fitness. He enjoys helping people-supporting charities, time with his wife and kids, road-biking with friends and efforts to stay physically fit.

                      A message from Jim on the achievements of SVL

                      SVL started in February 1967 by Charlie Schwab and Craig Vollhaber. Schwab-Vollhaber, Inc. (as it was named at the time) steadily grew and, in 1985, welcomed Paul Lubratt as another partner, becoming Schwab-Vollhaber-Lubratt, Inc. SVL’s founders had the determination to build the most talented, customer-focused HVAC representative in the Midwest. Our original drive and passion still shape the company and culture to this day. The achievements of an organization are the results of the combined efforts of every individual. From humble beginnings, SVL founders paved the way to industry success with hard work and determination. “Today, SVL is strongly organized with great people to lead our industry forward as we are challenged with fast-paced changes to reduce our environmental impact,” says Jim. Now, 55+ years later, SVL is under the leadership of two new principals who share the same vision and drive that has propelled SVL throughout the years. Built on a foundation of integrity, Jim Lubratt, and Charlie Vollhaber strive to ensure opportunities for personal growth, improved work environment, and shared life enrichment. The achievements of our organization are the results of the combined efforts of every individual.

                      This will close in 0 seconds

                      Charlie Vollhaber

                      Executive Vice President & Officer

                      Charlie Vollhaber is a third-generation employee at SVL, as a grandson of company co-founder Craig Vollhaber and son of former CEO Todd Vollhaber. Charlie holds a Bachelor of Science in mechanical engineering and an MBA, both from the University of Minnesota. He became an outside salesman for SVL in 2013, was made a partner in 2019, and then executive vice president and officer in 2022.

                      He grew up playing sports, including football, basketball, golf, and track, and enjoys the competitive nature of the HVAC industry. “I like that no two days are ever the same as there are always questions to answer and problems to solve,” he says. “Most of all, I enjoy working with great people and coordinating together on challenging projects to achieve positive results together.”

                      Outside of work, Charlie enjoys spending time with his wife, Lesley, and their three boys. He’s also fond of golfing, traveling, and attending concerts and sporting events. One of his favorite quotes is from the book of Philippians: “Do nothing from selfish ambition or conceit, but in humility count other more significant than yourselves. Let each of you look not only to his own interests, but also to the interests of others.” Because HVAC and construction is such a team effort, he says, “this mindset helps to create positive results in a vast majority of situations.”

                      A message from Charlie on the culture of SVL

                      “At SVL, we strive to cultivate a unique culture that revolves around finding and empowering exceptional individuals. We believe in equipping our team members with the right tools and resources to succeed.

                      As we’ve grown the business, we have deliberately maintained a small firm culture, fostering an environment where collaboration thrives. We encourage open dialogue and promote a sense of comfort among our employees, allowing anyone to ask questions and seek guidance from anyone else, regardless of their level within the organization.

                      We foster a workshop-like atmosphere where everyone’s contribution is valued. Presenting your work to another individual or a group of teammates provides a platform for collaboration, where ideas are shared, dissected, and improved collectively. We firmly believe in the power of mentoring and provide various avenues for both formal and informal guidance. Whether it’s through structured training programs or casual conversations, we encourage team members to discuss a wide range of topics, from work-related successes or issues to everyday personal life topics.

                      In summary, our culture is built on the foundation of attracting exceptional individuals, empowering them with the necessary tools, and fostering a collaborative environment where mentorship and growth thrive. We are committed to creating an atmosphere where every team member feels supported, valued, and encouraged to reach their fullest potential.”

                      This will close in 0 seconds

                      Al Gramse

                      Vice President of SVL Service Corporation

                      Al Gramse has been in the HVAC industry for over 30 years. He began as a service technician.  Then over his career worked in technical support, building automation, then service manager prior to his current role.

                      How did Al end up in the HVAC industry?  “After high school, I took a couple years to figure out what I wanted to do.   Where I was working at the time, a grumpy old coworker, who I didn’t get along with, walked up to me and said ‘What are you doing here?  Go back to school.’”  I said, “For what?”  He said “There’s a tech school down the street.  Go down there and pick something that interests you”. Then he walked away.  That weird interaction, with someone I didn’t get along with, sent me down a 30-year path in the HVAC industry.   Never underestimate the potential of a little encouragement.   Even if it is from a strange source.

                      Al has been with SVL for 15 years and is the head of our SVL Service division. “The people here are some of the best in the industry,” Al says. “A bunch of team-oriented, knowledgeable, go-getters.” His personal mantra is “figure it out,” “Do a little fact-finding on your own. Use your own brain before you use someone else’s. But know when to ask for help.” he prescribes. “It’s amazing what you can accomplish on your own if you dig in a little bit.”

                      Outside of work, Al has lots of outdoor hobbies, including hunting, fishing, and motorcycling, though his favorite pastime is simply hanging out with family.

                      This will close in 0 seconds

                      Jennifer Roach

                      Director of Marketing, Events & Administration

                      More than just a creative director, Jen brings 30 years of marketing and leadership magic to SVL. Her journey began in the trenches of graphic design, quickly evolving into crafting eye-catching campaigns for iconic brands like Target, Gabberts, Gander Mountain and Camping World. As a seasoned director and agency veteran, she honed her skills with recreational vehicle giant Parts Unlimited before leading creative teams at HOM Furniture and, ultimately, landing at SVL during a crucial growth phase.

                      Jen thrives on "servant-leadership," empowering her team and fostering a culture of trust and mutual respect. "It unlocks their potential, fuels creativity, and leads to work we're all proud of," she says. "I want my team to care, collaborate, and push boundaries together."

                      When not shaping impactful campaigns, Jen enjoys weekend adventures with her husband, Scott, and son, Crew. Their lives are a tapestry of shared passions, from bike rides and baking experiments to cheering on Simley High School wrestlers. And with her recently built forever home in Cottage Grove, her free time now includes a new, thrilling chapter: weekend renovation warrior!

                      This will close in 0 seconds

                      Mike Ruff

                      Vice President of Information Technology

                      Mike Ruff, the Vice President of Information Technology at SVL Inc., is a seasoned professional with an impressive 24-year tenure in the IT industry. His journey in the field is marked by extensive experience and expertise in various domains, including serving as a Cloud Architect focusing on Azure Software as a Service (SaaS), Infrastructure as a Service (IaaS), and both B2B and B2C solutions. Mike’s skills extend to being a Security Architect, where he has honed his knowledge in safeguarding digital assets, and he is also proficient in the Microsoft 365 stack, virtualization, routing, switching, and wireless technologies.

                      Beyond his professional roles, Mike is deeply passionate about technology in all its forms, which is evident in his career and personal hobbies. His love for technology is not just limited to his work but also spills over into his leisure activities. In the summertime, Mike enjoys the thrill of riding his motorcycle, embracing the freedom and adventure it brings. When winter arrives, he switches gears to snowboarding, seeking the excitement and challenge of the snowy slopes. These hobbies reflect Mike’s dynamic personality and continuous pursuit of technically engaging and physically exhilarating activities.

                      Mike Ruff's blend of professional expertise and personal passions make him a unique and valuable asset to SVL Inc., embodying a perfect synergy of technical acumen and a zest for life's adventurous aspects.

                      This will close in 0 seconds