SVL

Commercial HVAC

 Back

Lumalier Upper Air Uv Purification

GC SeriesCDU SeriesPM SeriesGL SeriesHW SeriesWM SeriesCM SeriesASD SeriesFA SeriesMED Series

GC Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-GC-Series

The GC series is for use in large open spaces where ceiling mounting is preferred. The open design of the GC series allows for a wide field of UVGI above the heads of occupants. This allows the unit to be highly effective at inactivation of pathogens in the upper-air space.

  • The GC Ceiling Mount Unit is an open configuration upper-air system to create a wide field of disinfection above the heads of occupants.
  • The different models accommodate a variety of coverage areas.
  • The unit uses 1 or 2 Philips PL-L UV Lamps.

CDU Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-CDU-Series

The CDU 2×2 upper air light fixture combines dynamic and passive UVC disinfection for high-risk areas.

  • This fixture is designed to install into a suspended ceiling grid T-bar system, flush mounted to ceiling (hardwired), or cable-suspended.
  • Six foot pre-wired 3-conductor flex-conduit. Optional cord with plug.
  • Four high output PL-L35WTUV lamps, wind chill corrected.

PM Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-PM-Series

The PM unit is a pendant mounted, louvered, upper-air option designed for targeted disinfection in low ceiling areas. The PM series fixtures are for use in areas where ceiling mounting is preferred and the ceiling height is lower. The louvered design of this series allows for the upper-air field of UV to stay in a straight line above the heads of the occupants, allowing for effective pathogen mitigation while maintaining CDC/NIOSH upper-air guidelines.

  • This unit is designed to be used with ceilings 8′ – 10′.
  • Pendant mounted configuration allows for 360 degree disinfection.
  • Pendant Mount: Four 18 W, vertical-mount 9″ lamps, 360º light field.
  • This unit’s effective coverage is up to 440 s.f.

GL Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-PM-Series

The GL series open style UV fixtures are wall mounted upper-air systems for use in spaces with high ceilings. The open design of the GL series allows for a wide field of UVGI above the heads of occupants. This allows the unit to be highly effective at inactivation of pathogens in the upper-air space.

  • The GL series has a range of models to accommodate a range of effective coverage areas.
  • Each model uses 1, 2 or 4 Philips PL-L UV lamps.

GL Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
GL-Short-white

The GL series open style UV fixtures are wall mounted upper-air systems for use in spaces with high ceilings. The open design of the GL series allows for a wide field of UVGI above the heads of occupants. This allows the unit to be highly effective at inactivation of pathogens in the upper-air space.

  • The GL series has a range of models to accommodate a range of effective coverage areas.
  • Each model uses 1, 2 or 4 Philips PL-L UV lamps.

HW Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-HW-Series

The HW series is for use in hallways, corridors and other long, narrow spaces. The HW fixtures are for use in areas where wall mounting is preferred and the ceiling height is lower. The louvered design of this series allows for the upper-air field of UV to stay in a straight line above the heads of the occupants, allowing for effective pathogen mitigation while maintaining CDC/NIOSH upper-air guidelines.

  • This unit covers up to 220 s.f.
  • Hallway-mount with two 18 W, vertical-mount 9″ lamps, 180º light field.
  • This unit uses 2 Philips PL-L 18W UV lamps.

WM Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-HW-Series

The WM series fixtures are for use in areas where wall mounting is preferred and the ceiling height is lower. The louvered design of this series allows for the upper-air field of UV to stay in a straight line above the heads of the occupants, allowing for effective pathogen mitigation while maintaining CDC/NIOSH upper-air guidelines.

  • This unit is designed for rooms where ceilings are 8′-10′.
  • The effective coverage area for the WM-136 is 240 sq. feet, and the WM-236 is 480 sq. feet.

CM Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-CM-Series

The CM series is for use in small rooms where available wall space is at a premium. The CM fixtures are for use in areas where wall mounting is preferred and the ceiling height is lower. The louvered design of this series allows for the upper-air field of UV to stay in a straight line above the heads of the occupants, allowing for effective pathogen mitigation while maintaining CDC/NIOSH upper-air guidelines.

  • The CM unit is designed for use in rooms with ceilings 8′-10′.
  • The effective coverage area for the CM-218 unit is 120 sq. feet.
  • Model CM uses 2 Philips PL-L 18W UV lamps.

ASD Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-ASD-Series

Surface (unoccupied) & air (occupied) hybrid disinfection fixtures are for targeted disinfection of high-risk areas.

The ASD fixture is an advanced, dual-purpose air and surface disinfection unit engineered for overall pathogen load reduction.

  • Provide high-level, passive airborne pathogen reduction into high-risk occupied spaces.
  • Treat all surfaces to achieve high-log surface (fomite) decontamination in unoccupied spaces.
  • Are simple-to-operate, wall-mounted fixtures that easily replace expensive, roll-in, portable surface disinfection robots with a simple, labor-free system.
  • Optional motion sensors.
  • Optional control panel, with timers.

FA Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-FA-Series

Forced Air Units provide continuous air disinfection within a space when traditional upper-air or in-duct options are not available.

  • Designed to disinfect air at eye level.
  • Configured for continual air movement and disinfection.
  • Completely enclosed fixture for safety of the room occupants.
  • Models range from 300-1,000 s.f. disinfection.
  • No height restriction.

MED Series

Upper Air UV Purification

For More Information:
Manufacturer's Site
Lumalier-MED-Series

The MED units are a highly-target, upper-air system designed to be portable.

  • This unit is ideal for temporary medical structures, emergency shelters, traveling events, first aid tents, and disaster relief temporary structures.

Features:

  • The MED-418 includes four 18W Phillips UV lamps
  • This unit’s effective coverage is up to 440 s.f.
  • Comes with a 9′ support pole.
  • Coverage is 360 degrees.
Back to Manufacturer
Contact Us

Contact Us

    Reason for Contacting

    Get in TouchBillingEventsTraining/SeminarLiterature/Graphics/LogosEngineering ProjectsOther

    To Combat Spam, Please Solve This Problem
    7 + 1 =

    Please prove you are human by selecting the Key.

    This will close in 0 seconds

    Parts Inquiry

      To Combat Spam, Please Solve This Problem
      77 + = 87

      Please prove you are human by selecting the Key.

      This will close in 0 seconds

      Equipment Inquiry

        To Combat Spam, Please Solve This Problem
        4 + 2 =

        Please prove you are human by selecting the Flag.

        This will close in 0 seconds

        Shipping Date/IOM Manuals/Wiring Diagrams Request

          To Combat Spam, Please Solve This Problem
          15 + = 20

          Please prove you are human by selecting the Heart.

          This will close in 0 seconds

          Question for Sales Engineers

            Please prove you are human by selecting the Cup.

            This will close in 0 seconds

            Service Contact

              Please prove you are human by selecting the Tree.

              This will close in 0 seconds

              Aftermarket Parts

                Please prove you are human by selecting the Key.

                This will close in 0 seconds

                General Job Application

                  To Combat Spam, Please Solve This Problem
                  3 + 7 =


                  This will close in 0 seconds

                  Hydronics Contact Form

                    Please prove you are human by selecting the Star.

                    This will close in 0 seconds

                    Viral Mitigation Contact Form

                      To Combat Spam, Please Solve This Problem
                      87 − 86 =

                      Please prove you are human by selecting the Flag.

                      This will close in 0 seconds

                      Jim Lubratt

                      President & Chief Executive Officer

                      Jim Lubratt has been president of SVL since 2006. He first joined the company as a sales engineer in 1992 and was made a partner in 2000. He holds a Bachelor of Science in mechanical engineering from Southern Methodist University and first entered the HVAC industry as a marketing engineer for a heat pump manufacturer in Texas.

                      In addition to his role at SVL, Jim is vice president of AQC Industries, LLC, a manufacturer of specialized underground ductwork systems. He is also an investor and board member for Hydromx, Inc., a manufacturer of heat transfer nanofluids, and Crotega, Inc., creators of personal and building security solutions.

                      Jim and his wife, Tracy, met in college and married in 1993. They have three children, two of whom have graduated college in Texas, while their youngest is attending Grand Canyon University in Arizona.

                      Outside of work, Jim places a priority on his faith, family, friends, and fitness. He enjoys helping people-supporting charities, time with his wife and kids, road-biking with friends and efforts to stay physically fit.

                      A message from Jim on the achievements of SVL

                      SVL started in February 1967 by Charlie Schwab and Craig Vollhaber. Schwab-Vollhaber, Inc. (as it was named at the time) steadily grew and, in 1985, welcomed Paul Lubratt as another partner, becoming Schwab-Vollhaber-Lubratt, Inc. SVL’s founders had the determination to build the most talented, customer-focused HVAC representative in the Midwest. Our original drive and passion still shape the company and culture to this day. The achievements of an organization are the results of the combined efforts of every individual. From humble beginnings, SVL founders paved the way to industry success with hard work and determination. “Today, SVL is strongly organized with great people to lead our industry forward as we are challenged with fast-paced changes to reduce our environmental impact,” says Jim. Now, 55+ years later, SVL is under the leadership of two new principals who share the same vision and drive that has propelled SVL throughout the years. Built on a foundation of integrity, Jim Lubratt, and Charlie Vollhaber strive to ensure opportunities for personal growth, improved work environment, and shared life enrichment. The achievements of our organization are the results of the combined efforts of every individual.

                      This will close in 0 seconds

                      Charlie Vollhaber

                      Executive Vice President & Officer

                      Charlie Vollhaber is a third-generation employee at SVL, as a grandson of company co-founder Craig Vollhaber and son of former CEO Todd Vollhaber. Charlie holds a Bachelor of Science in mechanical engineering and an MBA, both from the University of Minnesota. He became an outside salesman for SVL in 2013, was made a partner in 2019, and then executive vice president and officer in 2022.

                      He grew up playing sports, including football, basketball, golf, and track, and enjoys the competitive nature of the HVAC industry. “I like that no two days are ever the same as there are always questions to answer and problems to solve,” he says. “Most of all, I enjoy working with great people and coordinating together on challenging projects to achieve positive results together.”

                      Outside of work, Charlie enjoys spending time with his wife, Lesley, and their three boys. He’s also fond of golfing, traveling, and attending concerts and sporting events. One of his favorite quotes is from the book of Philippians: “Do nothing from selfish ambition or conceit, but in humility count other more significant than yourselves. Let each of you look not only to his own interests, but also to the interests of others.” Because HVAC and construction is such a team effort, he says, “this mindset helps to create positive results in a vast majority of situations.”

                      A message from Charlie on the culture of SVL

                      “At SVL, we strive to cultivate a unique culture that revolves around finding and empowering exceptional individuals. We believe in equipping our team members with the right tools and resources to succeed.

                      As we’ve grown the business, we have deliberately maintained a small firm culture, fostering an environment where collaboration thrives. We encourage open dialogue and promote a sense of comfort among our employees, allowing anyone to ask questions and seek guidance from anyone else, regardless of their level within the organization.

                      We foster a workshop-like atmosphere where everyone’s contribution is valued. Presenting your work to another individual or a group of teammates provides a platform for collaboration, where ideas are shared, dissected, and improved collectively. We firmly believe in the power of mentoring and provide various avenues for both formal and informal guidance. Whether it’s through structured training programs or casual conversations, we encourage team members to discuss a wide range of topics, from work-related successes or issues to everyday personal life topics.

                      In summary, our culture is built on the foundation of attracting exceptional individuals, empowering them with the necessary tools, and fostering a collaborative environment where mentorship and growth thrive. We are committed to creating an atmosphere where every team member feels supported, valued, and encouraged to reach their fullest potential.”

                      This will close in 0 seconds

                      Al Gramse

                      Vice President of SVL Service Corporation

                      Al Gramse has been in the HVAC industry for over 30 years. He began as a service technician.  Then over his career worked in technical support, building automation, then service manager prior to his current role.

                      How did Al end up in the HVAC industry?  “After high school, I took a couple years to figure out what I wanted to do.   Where I was working at the time, a grumpy old coworker, who I didn’t get along with, walked up to me and said ‘What are you doing here?  Go back to school.’”  I said, “For what?”  He said “There’s a tech school down the street.  Go down there and pick something that interests you”. Then he walked away.  That weird interaction, with someone I didn’t get along with, sent me down a 30-year path in the HVAC industry.   Never underestimate the potential of a little encouragement.   Even if it is from a strange source.

                      Al has been with SVL for 15 years and is the head of our SVL Service division. “The people here are some of the best in the industry,” Al says. “A bunch of team-oriented, knowledgeable, go-getters.” His personal mantra is “figure it out,” “Do a little fact-finding on your own. Use your own brain before you use someone else’s. But know when to ask for help.” he prescribes. “It’s amazing what you can accomplish on your own if you dig in a little bit.”

                      Outside of work, Al has lots of outdoor hobbies, including hunting, fishing, and motorcycling, though his favorite pastime is simply hanging out with family.

                      This will close in 0 seconds

                      Jennifer Roach

                      Director of Creative Services

                      Jen Roach brings 30 years of marketing and leadership experience to her work directing the creative team at SVL. A graduate of South St. Paul High School, she holds a Bachelor of Arts in visual communication and design from Brown College.

                      She began her career in graphic design before moving into an art director role with Dayton Hudson Corporation. Later, she became creative director at an advertising agency working on recreational vehicle accounts, before taking in-house creative director positions first at Gander Mountain and then at HOM Furniture.

                      Jen joined SVL in 2021, during a time of major growth for its marketing team. “My style is ‘servant-leadership’, putting my team’s needs before my own, doing whatever I can to make them feel valued and secure,” she says. “I think it drives stronger working relationships, builds trust, and produces higher quality work. I want the team to care about the company, the work, and each other.”

                      Outside of work, Jen enjoys spending time with her husband, Scott, and son, Crew. Together they love weekend getaways, being outside, riding bikes, gardening, baking, and traveling to wrestling tournaments to cheer on Simley High School. She recently constructed her forever home in Cottage Grove and now spends her free time as a weekend reno warrior.

                      This will close in 0 seconds