BF-1-BG-450-2

Burners

For More Information:

Oilon burners are especially suited for hot water boilers,
steam boilers, and hot air generators. They can be used
in both forced-​draught and induced-​draught combustion
chambers, and in a wide range of different conditions.

All models feature automatic flame monitoring.
Burner operation is controlled by a program relay,
which takes care of all the necessary program stages
automatically.

Oilon oil burners are designed and manufactured in
accordance with standards EN 267 and EN 298 and gas
burners with EN 676.

All oil burners presented in this brochure are suitable for
firing light fuel oil. For applications requiring renewable
heating oils, please contact us, and we will determine
which burner solution is best for you.

Our gas burners are compatible with both natural gas and
liquefied petroleum gas. In either case, the structure of the
burner will be identical. However, burner adjustments and
the gas supply pressure depend on the fuel; for further
details, refer to your burner’s operation and maintenance
manual.

Capacity range: 15–550 kW

Burner Series 50 – 90

Burners

For More Information:

Burners in series 50 – 90 are monoblock type fully automatic light fuel oil, gas or dual fuel burners.  Capacity regulation is two-​stage (H), and gas burners can be delivered with modulating (M) regulation. Control automation is integrated into the burner. Modulating burners control the fuel-​to-air ratio electronically.

Applications: terrace and single-​family houses, hotels, paintshops, bakeries, gardens. Available also for ships and offshore applications.

Capacity range: 200 – 1 540 kW

Burner Series 130 – 280

Burners

For More Information:

Burners in series 130 – 280 are monoblock type fully automatic light fuel oil, heavy fuel oil, gas or dual fuel burners. Capacity regulation possibilities are two-​stage (H) or modulating (M). Control automation is either integrated into (H and WD3x models) or separated from the burner (WDx00). For features such as being able to see burner’s status information and connecting the burner to a remote surveillance system, choose separate automation. The Low-NOx burners in the series comply with the class 3 (EN676) requirements.

Applications: e.g. water and steam boilers, hot air generators and thermal oil boilers. Available also for ships and offshore applications.

Capacity range: 270 – 3500 kW

BURNER SERIES STREAM 350/450

Burners

For More Information:

Stream series burners have a particularly low noise level. Automation (WD3x) is integrated to the burner to facilitate installation, use and maintenance. If desired, the burner can be supplied with a separate automation (WDx00). Electronic fuel and air ratio control provides good energy efficiency and reliable operation of the burner. The Low-NOx burners in the series comply with the class 3 (EN676) requirements.

Applications: e.g. water and steam boilers, hot air generators and thermal oil boilers.

Capacity range: 530 – 5500 kW

BURNER SERIES 300 – 700

Burners

For More Information:

Burners in series 300 – 700 are monoblock type fully automatic light fuel oil, heavy fuel oil, gas or dual fuel burners. All burners are modulating (M). Control automation is either integrated to (WD3x burners) or separated from the burner (WDx00 burners). The Low-NOx burners in the series comply with the class 3 (EN676) or the class 4 (FprEN676) requirements.

Applications: e.g. water and steam boilers, hot air generators and thermal oil boilers. Available also for ships and offshore applications.

Capacity range: 800 – 10 500 kW

MONOX BURNERS

Burners

For More Information:

Burners in the Monox 1000/1200 series are modulating (M), fully automated light oil, gas and dual fuel monoblock burners. They are equipped with an electronic capacity controller (WiseDrive WDx00). Their NOx emissions in gas combustion are < 120 mg/Nm3 (class 2). The Low-NOx burners in the series meet class 3 (EN676) requirements. All models have a separate control unit (optional extra). Applications: e.g. water and steam boilers, hot air generators and thermal oil boilers

Capacity range: 1 800 – 13 300 kW

BURNER SERIES 400 – 2000 ME

Burners

For More Information:

Burners in series 400 – 2000 ME are fully automatic light fuel oil, heavy fuel oil, gas or dual fuel burners. Capacity regulation method is modulating (M). The product family also includes models that are suitable for use with preheated combustion air (max. +250°C). All models have a separate control cabinet, a booster unit and a combustion air fan as accessories.

Applications: e.g. water and steam boilers, hot air generators and thermal oil boilers.

Capacity range: 1200 – 29 500 kW

ACE- burners

Burners

For More Information:

Oilon ACE presents the latest low emission technology. The typical NOx emissions are less than 60 mg/nm3, ref. 3% O2 and less than 30 mg/nm3 with external Flue Gas Recirculation (FGR). As a result of well completed combustion the CO emissions are also on a low level. Oilon ACE is mainly used in water tube and fire tube boilers, but is suitable in other applications as well.

Applications: e.g. water and steam boilers, hot air generators, thermal oil boilers, and power plant boilers.

Capacity range: 800 – 90 000 kW

K-BURNERS

Burners

For More Information:

K burners are the right choice for many demanding industrial processes, e.g. for hazardous waste incineration. Despite possible large fluctuations in furnace pressure and process conditions, the flame remains very stable resulting from tangential combustion air feeding and the optimized air registers. The burner construction is designed for heavy duty operation to guarantee high availability in extreme conditions.

Applications: e.g. power plants, pulp and paper industry, metallurgic processes, handling hazardous and municipal waste

Capacity range: 0,5 – 31 MW

LANCE BURNERS

Burners

For More Information:

Lance burners are optimal for use as start-​up and support burners in fluidized bed boilers and grate boilers, but can be utilized in other applications as well. The critical parts of the burner are protected by retracting them to a back position when the burner is in a stand-​by condition. Lance burners are designed and constructed to tolerate demanding furnace conditions, such as the effects of sand bed, ash and particles.

Applications: e.g. district heating plants, power plants, pulp and paper industry, metallurgic processes

Capacity range: 1,5 – 58 MW

LITEX BURNERS

Burners

For More Information:

The wind box of Litex burners combines unique shaping with optimized combustion air flows. The burners are compact and very light for their capacity level. The standard combustion head is masoned, with a steel alternative. The Litex series is primarily designed for water and fire tube boilers.

Applications: e.g. district heating plants, power plants

Capacity range: 5 – 45 MW

S – BURNERS

Burners

For More Information:

S-​burners are typically used in water tube and fire tube boilers, but are suitable for various other kinds of boilers as well. They can be utilized also for special fuels and in process industry. The flame shape adjusting possibilities are wide for optimizing the flame geometry in various furnace dimensions.

Applications: district heating plants, power plants, pulp and paper industry, handling hazardous and municipal waste. Available also for ships and offshore applications.

Capacity range: 0,9 – 63 MW