RBI® - Hot Water Heaters
Futera III
Hot Water Heater
For More Information:
As part of the Futera line – RBI’s flagship series of boilers and hot water heaters that offer the most versatile, durable and energy efficient units across both near and full condensing offerings – the gas-fired Futera III features full modulation with 5:1 turndown while supplying the precise amount of heat necessary to maintain desired building temperature by matching heating demand without overfiring or wasting energy.
These dependable, easy-to-service boilers feature rugged construction and sleek, stainless steel jacket design. With models ranging from 500-1999 MBH, all Futera III units come equipped with HeatNet 3.0 boiler control software, ensuring the highest operating efficiencies of any domestic boiler and hydronic heating system on the market.
- 88% Maximum Efficiency
- 500-1,999 MBH
- Full Modulation with 5:1 Turndown
- Cast Iron Headers (Boilers)
- Bronze Headers (Water Heaters)
- HeatNet 3.0 Integrated Boiler Management System
- Copper Finned Tube Heat Exchanger
- Symmetrically Air/Fueled Coupled
- Gasketless Heat Exchanger Assembly
- Modbus Protocol for BMS Communications
- Stainless Steel Jacket Panels
Futera Fusion XLF
Hot Water Heater
For More Information:
When it comes to high efficiency and even higher BTU capacities, RBI’s Futera Fusion XLF is in a class of its own. By combining the best features of the Futera Fusion and Futera XLF systems, the engineers at RBI have created a new commercial boiler system that increases output levels while maintaining ultra-high efficiencies – the likes of which have never been seen within the commercial boiler market.
As a fully condensing, gas-fired boiler, the Fusion XLF features an innovative design that brings superior power and energy efficiency with premium boiler performance and serviceability, all together in an unprecedented, industry-leading, small package design.
Ideal for commercial boiler applications with low operating, return or make-up water temperatures, the Fusion XLF is capable of reaching efficiencies as high as 99% at full input. With full modulation up to 5:1, the firing system continuously varies the energy input to match the heating load without overfiring and wasting fuel – providing extremely high part-load efficiencies.
The Fusion XLF also features HeatNet 3.0, an intuitive boiler control system that monitors system characteristics and modulates boiler firing rates, maximizing turndown ratios and maintaining peak efficiency, regardless of the load.
Features and Benefits
- Up to 99% Efficiency
- Full Modulation with Continuous, 5:1 Turndown
- Sealed Combustion/Direct Vent
- Symmetrically Air/Fuel Coupled
- Commercial Combustion Controls
- HeatNet 3.0 Integrated Boiler Control Platform
- Gasketless Heat Exchanger Assembly
Infinite Energy²
Hot Water Heater
For More Information:
Part of RBI’s stainless steel line of high-efficiency boilers and water heaters, Infinite Energy² is available from 199 to 1000 MBH, providing flexible solutions for all of your heating and domestic hot water system needs. Utilizing state-of-the-art Radial Variable Circulation (RVC) stainless steel heat exchangers, IE² maximizes heat transfer with operating efficiencies up to 98%.
Using all of today’s modern technologies, including pre-mix burners, modulating firing rates up to 20:1 and integrated cascade controls, IE² offers superior performance and application flexibility. Units are PVC, polypropylene and stainless steel vent capable and can be installed in multiple unit configurations using its onboard boiler control configuration – providing flexible modulation for maximum efficiencies.
Features and Benefits
- Up to 98% Ultra-High Efficiency
- RVC Stainless Steel Heat Exchanger
- PVC, PPandStainless Steel Venting
- Intuitive Integrated Control Platform
- Multi-unit Cascade Communication
- Pre-Mix Burner Technology
- Low NOx and CO Emissions
- 3″ Minimum Gas Pressure
- 160 PSI Working Pressure
- Integrated Condensate Neutralizer System
- Full Modulation
Futera II
Hot Water Heater
For More Information:
Futera II Series hot water supply boilers provide dependable boiler performance with 85% efficiency levels, alongside industry-leading NOx levels of less than 10 ppm. With sizing that ranges from 500 to 1,950 MBH, the Futera II provides a high concentration of BTUs in a small footprint, making it an excellent choice for jobs where mechanical space is limited, as well as other modular, step-fired boiler applications.
The Futera II’s compact, low maintenance boiler and venting flexibility permit easy boiler installation and service, making it the ideal non-condensing, gas-fired boiler and hot water heater for any hot water supply application. Futera II units have the ability to use room air for combustion and are also capable of drawing in air from the outside for sealed combustion. Units can be set up to vent vertically as Category I appliances or horizontally as Category III through a sidewall, making the Futera II ideal for buildings without chimneys, where roof penetrations cannot exist or on electric-to-gas conversions.
Features and Benefits
- 500-1,950 MBH
- Up to 85% Efficiency
- Advanced Diagnostic Panel
- Cast Iron Headers (Boilers)
- Bronze Headers (Water Heaters)
- Flame Safeguard Control
- One-Piece Header Design
- Pump Delay Relay
- Stainless Combustion Chamber
- Vertical or Horizontal Venting Options
- 2-Stage Digital Operator
- CSD-1 & FM Compliant Gas Train
Dominator
Hot Water Heater
For More Information:
The Dominator Series from RBI, with sizing from 300 to 2,100 MBH, offers the ultimate flexibility in boiler and water heater application, all at a competitive price. With efficiencies nearing 85.1%, the Dominator has one of the highest efficiency levels available in non-condensing boiler and water heater market. Capable of operating using mechanical room air for combustion or by drawing outside air directly as a sealed combustion product, the Dominator can vent combustion gases vertically or horizontally with factory equipped draft-inducer kits.
In commercial boiler applications where mechanical space is limited, the Dominator’s stackable frame option allows units to be stacked two-high, adding valuable BTUs while keeping the footprint to the size of a single unit. In addition, the Dominator provides up to four stages of firing, allowing the boiler to match the heating load more closely.
And with built-in serviceability features, including a slide out heat exchanger, contractors no longer need to remove the heat exchanger for service or repair, which, when coupled with high efficiencies, makes the Dominator a cost-saving option for any boiler application.
Features and Benefits
- Up to 85% Efficiency
- 300-2,100 MBH
- 2 or 4-Stage Firing Modes (300 On/Off Only)
- Cast Iron Headers (Boilers)
- Bronze Headers (Water Heaters)
- Category I & III Venting
- Finned Copper Tube Heat Exchanger – Two-Pass
- Stackable Frame (Seismic Approval up to Zone 4)
- Direct Vent (up to 35’ Equivalent)
LCD Dominator
Hot Water Heater
For More Information:
The LCD Dominator Series offers a competitively priced indoor/outdoor boiler and hot water heating unit that meets low NOx requirements, while maintaining superior performance and serviceability that RBI is known for. The LCD provides dependable performance in a wide range of rugged environments and process applications with a wide 400 to 2,300 MBH range.
At the heart of the unit is a sealed combustion chamber that provides the flexibility of using either outside air or mechanical room air for combustion. Providing better performance while being priced in line with atmospheric boilers on the market, the LCD features smaller vent sizes, resulting in lower boiler installation and operation costs.
The LCD features a robust, compact design that is constructed with high-quality materials, which, when paired with a proven pilot ignition system and a wide variety of venting options, makes this unit one of the most dependable non-condensing boilers in the commercial boiler market.
Features and Benefits
- 400-2,300 MBH
- Finned Copper Tube Heat Exchanger
- On/Off, All Sizes 2-Stage, 600-2,300
- Cast Iron Headers (Boilers)
- Bronze Headers (Water Heaters)
- Category I Vertical Venting
- Category III Thru-Wall Venting (up to 35’)
- Slide-Out Heat Exchanger
- Stackable Frame (Seismic Approval up to Zone 4)
Spectrum
Hot Water Heater
For More Information:
With models ranging from 100-399 MBH, Spectrum Series boilers’ unique design and optional corrosion-resistant, brushed stainless steel jackets make them ideal for indoor and outdoor installations in corrosive or harsh environments.
A unique feature within this MBH range, the Spectrum Series’ diagnostic control panel allows for easy troubleshooting, and, when coupled with the self-diagnostic light package, makes the Spectrum Series easy to assess, maintain and service. All Spectrum Series non-condensing, gas-fired boilers and hot water heaters are constructed using cast iron headers for application flexibility, and feature built-in draft diverters to lower the height of the unit and, most importantly, to reduce installation costs.
Features and Benefits
- 100-399 MBH
- On/Off or 2-Stage/4-Stage
- Automatic Reset High Limit 100-200
- Manual Reset High Limit 250-400
- Built-in Draft Diverter
- Stainless Steel Burners
- Cast Iron Headers (Boilers)
- Bronze Headers (Water Heaters)
- Inlet & Outlet Thermometers
- Mounted and Wired Flow Switch
- Vent Damper (100-250 MBH Boilers Only)
- Self Diagnostic Light Package
- Pump Control
- Electronic Ignition