Series WTS

Infrared Heaters

For More Information:

Series WTS - SRP

Features

  • Two-Stage
  • Natural gas or propane
  • Vented or unvented use
  • 3 try DSI ignition with self-diagnostic
  • 3- prong plug for electric supply
  • Reflector end caps are standard
  • Operating indicator light
  • Lifetime limited warranty on burner head

Low Intensity – T Series

Infrared Heaters

For More Information:

Series T heaters feature optimal comfort and energy savings with SRP’s two-stage technology. High-low capability allows for quicker recovery on the high fire and economical steady operation on the low fire.

Features

  • Rates 40,000 to 220,000 BTU/HR
  • Separated Controls Compartment
  • Self-diagnostic Ignition module
  • Parabolic Aluminum Reflectors
  • Heavy Duty Couplings
  • PSC Blower Motor
  • Direct Spark Ignition
  • 24v Direct Wire for Thermostat
  • Jet Stream Burner
  • Vented or Unvented

Models Available : TA, TX, TXR

Low Clearance – LT Series

Infrared Heaters

For More Information:

Series LT two-stage heaters are designed for low ceiling applications such as animal confinements, hallways, and service counters. The patented burner design provides unequalled even heat distribution with end-to-end output variance of less than 15%. Two-Stage control provides quicker recovery on high fire and economical operation on low fire.

Features

  • Rates 40,000 to 100,000 BTU/HR
  • Separated Controls Compartment
  • Self-Diagnostic Ignition module
  • Parabolic Aluminum Reflectors
  • Heavy Duty Couplings
  • PSC Blower Motor
  • Direct Spark Ignition
  • 24v Direct Wire for Thermostat
  • Jet Stream Burner
  • Vented or Unvented

Models Available: LTA, LTX, LTXR

Indoor – ETSV Series

Infrared Heaters

For More Information:

A modern heating solution built to perform safely and dependably for indoor and outdoor applications.

Features

  • True two-stage tube heater
  • Rates 40,000 and 80,000 BTU/hr
  • Wind resistant up to 12 mph
  • Self-diagnostic ignition module
  • Effective for ceiling heights 9’ to 16’
  • Clearance to combustibles as low as 4”
  • Up to 50% electrical energy savings with powerful PSC motor
  • Available vented or unvented
  • Easy to install maintenance-free heat solution
  • Compatible with smart wireless technology

Low Intensity – U Series

Infrared Heaters

For More Information:

Model U -SRP

Features

  • Rates 40,000 to 220,000 BTU/HR
  • Separated Controls Compartment
  • Self Diagnostic Ignition Module
  • 100% Parabolic Aluminum Reflectors
  • Heavy Duty Couplings
  • PSC Blower Motor
  • Direct Spark Ignition
  • 24v Direct Wire for Thermostat
  • Jet Stream Burner
  • Vented or Unvented

Models Available: UA, UX, UXR

Low Clearance – L Series

Infrared Heaters

For More Information:

Series L single-stage heaters are designed for low ceiling applications such as animal confinements, hallways, and service counters. The patented burner design provides unequaled even heat distribution with an end-to-end output variance of less than 15%.

Features

  • Rates 40,000 to 100,000 BTU/HR
  • Separated Controls Compartment
  • Self-Diagnostic Ignition module
  • Parabolic Aluminum Reflectors
  • Heavy Duty Couplings
  • PSC Blower Motor
  • Direct Spark Ignition
  • 24v Direct Wire for Thermostat
  • Jet Stream Burner
  • Vented or Unvented

Models Available: LA, LX, LXR

WTH Series

Infrared Heaters

For More Information:

Features

  • Single Stage
  • Natural gas or propane
  • Vented or unvented use
  • 3 try DSI ignition with self-diagnostic
  • 3- prong plug for electric supply
  • Reflector end caps are standard
  • Operating indicator light
  • Lifetime limited warranty on burner head
  • 2 years limited warranty on controls
  • 5 years limited warranty on hot rolled heat exchanger
  • 7 years limited warranty on aluminized heat exchanger
  • No hanging chain required on burner
  • 89% Efficient deep-dish aluminum reflector
  • All control components separated from burner compartment

Long Wave Electric Infrared Heater

Infrared Heaters

For More Information:

The eWAVE electric heater was developed together with the University of Modena Enzo Ferrari Engineering Department. The challenge was met by maximizing the radiant output using a sophisticated aluminum extrusion designed by the Ferrari Engineers – the thick black anodized coating further enhanced the performance while protecting against the elements. Certified for indoor and outdoor applications, available heat output settings 1500W, 3200W, 3000W, and 4500W, single or 3 phase.

Features

  • Modern European design
  • Even heat pattern
  • High efficiency
  • IP55 rated – outdoor approved
  • Corrosion-resistant
  • Built-in waterproof junction box
  • Engineered bracket included for easy installation and maintenance
  • Flexible mounting adjustment from 10 to 50 degree
  • Made from 100% recyclable material
  • Premium warranty with complete replacement
  • Compatible with smart technology

Medium Wave Electric Infrared Heater

Infrared Heaters

For More Information:

Combines the elegance of the long wave design with the Schott Nextrema® glass, which provides infrared transparency of almost 90% and is comfortable to the human eye. Certified for indoor and outdoor applications, available at 1800W, 110 or 240V.  The dimmable Medium Wave version is equipped with remote control, which can control multiple heaters, selecting operation at 1/3, 2/3, or complete power.

Features

  • Modern European design
  • Focused heat pattern
  • High efficiency
  • IP55 rated – outdoor approved
  • Corrosion-resistant
  • Built-in waterproof junction box
  • Engineered bracket included for easy installation and maintenance
  • Flexible mounting adjustment from 10 to 50 degree
  • Made from 100% recyclable material
  • Premium warranty with complete replacement
  • Compatible with smart technology

Short Wave Electric Infrared Heater

Infrared Heaters

For More Information:

Shortwave heaters are developed to provide the best heating performance with engineered parabolic internal reflectors. Lightweight and easy to install, they can direct heat to people or things based on your heating requirements. Certified for indoor and outdoor applications, available at 1500W, 220-240V.

Features

  • IPX5 Weather Resistance – halogen bulb is not affected by direct contact of rain or snow
  • Adjustable wall mount – L-bracket included
  • Cast iron, epoxy powder coated – cast iron finish blends perfectly with outdoor environments
  • 1500 Watts, 220/240 Volts
  • Halogen bulb – creates instant short-wave heat
  • 1-year warranty includes a 1500 hour bulb life guarantee!