AHBC Series

Fan Coils

For More Information:

The AHBC Series hideaway unit is for fully concealed installation in a furred-down ceiling space. This is an open blower-type fan coil requiring a sealed return air space. The filter, return plenum, and access panel do not come with the base unit. The space-saving AHBC is only 10 inches tall and provides easy access for the servicing and maintenance of the entire assembly. Enjoy the design versatility of a hidden fan coil with this unit.

ARHBC Series

Fan Coils

For More Information:

AE-Air Fan Coils

The design of the ARHBC Series fan coil with a hinged ceiling panel makes it perfect for recessed ceiling applications. The unit consists of an AHBC fan coil enclosed in a cabinet with a decorator-style hinged access panel that also serves as a return air panel. The adjustable ceiling frame and access panel permit easy field adaptation to most ceiling types for custom fit and maximum accessibility to the unit and controls.

APHBC Series

Fan Coils

For More Information:

This unit consists of an AHBC Series fan coil with a factory-installed return air plenum. Return air ducting can be easily attached to the unit plenum. Meet ASHRAE requirements and exceed design expectations with this fan coil option.

ACHBC Series

Fan Coils

For More Information:

The ACHBC Series is designed for installations without sufficient room for ductwork. It contains all of the features of the AHBC Series and includes a decorative cabinet with a stamped discharge grille. The cabinet has an attractive baked-on light gray enamel finish. The aesthetically pleasing stamped return air grille in the hinged bottom panel comes standard.

Features (Applies To All Units):

  • Basic Unit – All fan coils have heavy gauge galvanized steel to resist corrosion. All models are approved for installation with “0” clearance to combustible material.
  • Insulation – Plenums and cabinets include Tuf-Skin dual-density fiberglass blanket insulation with an antimicrobial agent.
  • Ceiling Panels – Hinged access/return panels manufactured with heavy gauge galvanized steel, captive mounting screws, and an attractive white baked powder finish.
  • Condensate Pans – Positively sloped drain pans made from galvanized steel and coated on the inside surface with a UL-listed closed-cell fire-retardant foam insulation. Pan includes both primary and secondary drain connections.
  • Return Air Plenums – Manufactured from galvanized steel and insulated with Tuf-Skin dual-density fiberglass blanket insulation and a one-inch TA fiberglass filter.
  • Coils – Constructed with seamless copper tubes and headers. The tubes expand into corrugated aluminum fin material for a permanent primary to secondary surface bond. AE-Air has coils tested underwater at 350 PSI for operation at 300 PSI. Coils include manual air vents.
  • Fan Wheels/Housing – Double-width, double-inlet (DWDI) forward-curved, centrifugal type. Wheels are statically and dynamically balanced for smooth, quiet operation. The housing is heavy-gauge galvanized steel with die-formed inlet cones.
  • Motors – Standard motors are PSC, permanently lubricated type with internal thermal overload protection.