Measurements and Sensors

iMEASURE-D



Measurements and Sensors



For More Information:


Global Plasma Solutions - iMeasure D - Measurements and Sensors

The GPS-iMEASURE-D ion detector is permanently mounted in the duct downstream of any GPS ionization device. It measures ion levels in real time and reports back to a BAS. It includes three sensitivity levels: 20,000/200,000/2,000,000 ions/cc/sec, that can be set based on the application and in-duct location.

Features:

  • Monitor In-duct Ionization Levels
  • 20,000 to 2M ions/cc/sec
  • Input Voltage 12 to 24V AC or DC
  • LED Operation Status

iDETECT-P



Measurements and Sensors



For More Information:


Global Plasma Solutions - iDetect-P - Measurements and Sensors

The GPS-iDETECT-P is a plenum mounted ionization detector that can confirm the output from the GPS-iMod® System. The GPS-iDETECT-P provides the ability to monitor ionization status in a plenum to confirm that the ionization equipment installed is working properly. The sensor is designed for duct mounting.

Features:

  • Auto-Calibration
  • Positive and Negative Ion Sensing
  • 10 Inch Sensing Probe
  • Universal Voltage Input
  • NO and NC “Dry” Contacts

iMEASURE



Measurements and Sensors



For More Information:


Global Plasma Solutions - iMeasure - Measurements and Sensors

The GPS iMeasure is the first commercially available ion detector that can be permanently mounted in the space to measure ion levels in real time and report back to a BMS.

Features:

  • Auto Calibration
  • Auto Zero
  • 0-10VDC Output for BAS Monitoring 24/7
  • Watchdog Timer
  • Bi-color LED
  • 0-1,000,000 ions/cc Range